Turtle 50 Capacity 3592 Compatible, Waterproof, Plastic Slots, No Exposed Foam

Category:

-This waterproof heavy duty case stores 50 3592/T10K tapes and provides protection against the key problems that cause data loss:

physical damage from impact

tape distortion from wound-in debris

fast and large changes in temperature and humidity

Features

Waterproof

Superior cushioning and no exposed foam or debris generating agents

Individual slots for each tape

Airtight

ATA Impact certified

Stainless steel hardware

Double movement latches prevent accidental opening

Double padlockable

Lifetime warranty

Shipping dims: 25″ x 21″ x 9″

Shipping weight: 15 lbs

Compatible Locks

Turtle Lock – 5020

Turtle Lock – TSA

Certifications

Waterproof IPX7

Dustproof IP6X

Impact ATA 300

Drop Test ASTM D-4169 CC-18

Vibration STM D-4169 DC-18

Rainfall ASTM D-4169 DCc-18

Immersion MIL-STD-810F

Descriptions of Tests

ATA Specification 300 Category 1

Airline transport container suitable for a minimum of 100 airline trips

Impact Resistance Test; samples were exposed to impact using a bar weighing 13.2lbs with a hemispherical end of 3.2cm. Bar was dropped with its longitudinal axis vertical on to each sample’s weakest point from a height of 0.5m. Samples were conditioned to a temperature of -20°C before impact exposure.

ASTM D-4169 DC-18

Level 1 Schedule A Handling (Manual)

Drop tests – a series of drops on each edge, corner and face of the case from a height of no less than 48cm(19”) and with loads of 6.8-31.8kg(15-70lbs) determined by case size. Samples were conditioned at lab ambient conditions and then temperatures of -28°C and +60°C for a minimum of 3 hours at each condition.

ASTM D-4169 DC-18

Level 1, Schedule F loose load vibration

Vibration – The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks occurred during transportation of loose loads.

ASTM D-4169 DC-18

Level 1, Schedule H Environmental Hazard Rainfall

Simulated rainfall for 2hrs at a rate of 10cm/hr (4”). Samples were conditioned to -20 degrees C and +52 degrees C.

MIL-STD-810F

Method 512.4

Immersion – The case is submerged in a basin of water to a depth of 1 meter (3.28 ft) to the top most part of the case for 30 minutes. The case is heated to 10 degrees F higher than the temperature of the water.

IP 67 ingress protection

6- Total protection from dust

7- Protected against the effects of immersion between 15cm (5.9”) and 1m (39.37”)

Additional information

Weight 6.8 kg
Dimensions 63.5 × 53.35 × 22.9 cm
Brand

MPN

07-549006

Capacity

50 tapes

Color

Black

Waterproof

Yes

Fireproof

No

Format

3592 / T10K / 359X / 9840 cartridges